|
| void | flash_init (void) |
| | Initialize the flash driver and the flash part.
|
| |
| void | flash_stop (void) |
| | Stop flash activity.
|
| |
| void | flash_read_bytes (uint8_t *buffer, uint32_t start_addr, uint32_t buffer_size) |
| | Read from flash.
|
| |
| void | flash_write_bytes (const uint8_t *buffer, uint32_t start_addr, uint32_t buffer_size) |
| | Write to flash.
|
| |
| void | flash_erase_subsector (uint32_t subsector_addr, FlashOperationCompleteCb on_complete, void *context) |
| | Erase the subsector containing an address, asynchronously.
|
| |
| void | flash_erase_sector (uint32_t sector_addr, FlashOperationCompleteCb on_complete, void *context) |
| | Erase the sector containing an address, asynchronously.
|
| |
| void | flash_erase_subsector_blocking (uint32_t subsector_addr) |
| | Erase the subsector containing an address.
|
| |
| void | flash_erase_sector_blocking (uint32_t sector_addr) |
| | Erase the sector containing an address.
|
| |
| bool | flash_sector_is_erased (uint32_t sector_addr) |
| | Check whether the sector containing an address is erased.
|
| |
| bool | flash_subsector_is_erased (uint32_t sector_addr) |
| | Check whether the subsector containing an address is erased.
|
| |
| void | flash_erase_bulk (void) |
| | Erase the entire flash.
|
| |
| void | flash_erase_optimal_range (uint32_t min_start, uint32_t max_start, uint32_t min_end, uint32_t max_end, FlashOperationCompleteCb on_complete, void *context) |
| | Erase a range of flash asynchronously, using as few erase operations as possible.
|
| |
| void | flash_sleep_when_idle (bool enable) |
| | Let the flash enter deep sleep between commands.
|
| |
| bool | flash_get_sleep_when_idle (void) |
| | Check whether flash_sleep_when_idle() is in effect.
|
| |
| bool | flash_is_initialized (void) |
| | Check whether flash_init() has run.
|
| |
| void | flash_power_down_for_stop_mode (void) |
| | Put the flash in deep power-down before entering stop mode.
|
| |
| void | flash_power_up_after_stop_mode (void) |
| | Wake the flash after stop mode.
|
| |
| void | flash_switch_mode (FlashModeType mode) |
| | Switch the read mode.
|
| |
| uint32_t | flash_get_sector_base_address (uint32_t flash_addr) |
| | Get the base address of the sector containing an address.
|
| |
| uint32_t | flash_get_subsector_base_address (uint32_t flash_addr) |
| | Get the base address of the subsector containing an address.
|
| |
| void | flash_enable_write_protection (void) |
| | Enable write protection, if the part requires it to be enabled explicitly.
|
| |
| void | flash_prf_set_protection (bool do_protect) |
| | Write-protect the recovery firmware region, or remove all protection.
|
| |
| uint32_t | flash_crc32 (uint32_t flash_addr, uint32_t length) |
| | Compute the CRC-32 of a flash region.
|
| |
| uint32_t | flash_crc32_legacy (uint32_t flash_addr, uint32_t length) |
| | Compute the legacy checksum of a flash region.
|
| |
| void | flash_use (void) |
| | Take a reference keeping the flash peripheral powered.
|
| |
| void | flash_release_many (uint32_t num_locks) |
| | Drop several references taken with flash_use().
|
| |
| status_t | flash_read_security_register (uint32_t addr, uint8_t *val) |
| | Read a byte from a security register.
|
| |
| status_t | flash_security_register_is_locked (uint32_t addr, bool *locked) |
| | Check whether a security register is locked.
|
| |
| status_t | flash_erase_security_register (uint32_t addr) |
| | Erase a security register.
|
| |
| status_t | flash_write_security_register (uint32_t addr, uint8_t val) |
| | Write a byte to a security register.
|
| |
| const FlashSecurityRegisters * | flash_security_registers_info (void) |
| | Get the security register layout.
|
| |
